Happy Friday! Today, I’m sharing a quick DIY project if you’re looking for something to do this weekend!

The other day, as I was organizing my jewelry, I realized I didn’t have proper storage for my necklaces. I made these bulletin boards for my office and thought it would also be a great way to also hang my necklaces.

Materials needed:

• (1) 2 feet by 1 feet light wood panels {I bought mine from Lowe’s and had them saw the 2′ x 2′ board in half + make sure the wood is hollow or light enough to pin a thumbnail}
• 1 yard linen fabric
• 11 inch by 23 inch felt fabric
• stapler gun
• glue gun
• scissors
• sawtooth picture hanger
• nails

1// This board was 2 feet by 2 feet and I had the nice people at Lowe’s cut the board in half.

2// Fold the linen in half and center the board on top of the linen.

3// Fold one side of the linen on top of the wood panel.

4// Then staple both ends of the folded linen.

5// Repeat on the other side and make sure you tug the linen tightly so the front panel is smooth and not loose.

6// From the top of wood panel, tuck each edge of the linen over like you’re wrapping a present. Then take the top of the tucked edge and staple the end of the fabric piece.

7// Staple the folded edges to secure the fabric tightly on the board.

8// Repeat on the other corner and staple all sides to secure the linen on the board.

9// Take the felt fabric to cover the backside of the board. Use hot glue to glue down the felt.

9// Centering the saw tooth, about 1/2 inch from the top, hammer down the saw tooth.

Here’s the finished DIY necklace board! I used fun thumbnails to hold the necklaces! You can either hang it on your wall or on top of your dresser.

Happy DIY’ing and make it a stellar weekend ya’ll!